Why Measure If You Don't Correct??

Bee Line recognizes that in addition to allowing the measurement of critical alignment angles, it is important that alignment equipment allows you to correct all out of tolerance alignment angles. After all, what good is it knowing the truck is out of alignment if you cannot correct the problems? This means not just correcting toe and/or rear tracking, but also correcting camber and caster. For those who want their truck aligned should expect that the shop can not only measure the alignment angles, but also have the proper equipment to correct any errors found.

With the ability to correct toe, rear tracking, and camber, Bee Line allows you to fix the #1, #2, and # 3 causes of tire wear and increase fuel efficiency. Also, with the ability to easily correct caster, vehicle handling can be improved increasing driver comfort and safety.

The Bee Line Advanced Aligner Runway machine and our alignment tooling is designed to allow a shop to perform all necessary alignment corrections. The machine places the truck at a comfortable working height, either in a pit or above ground. It allows you room to make adjustments to not only toe and tracking, but also camber and caster. It also allows you easy access to the vehicle's front end to inspect for worn front end parts and to perform necessary measurements and corrections. There is no fixed beam or equipment hindering access or making it difficult to work on the vehicle.

Bee Line's patented camber tooling can correct out of tolerance camber on all axle sizes and also correct any axle twist. The floating beam system is designed to be easily attached to the vehicle axle for corrections and removed and placed out of the way when the correction is finished. Special Bee Line fixtures also allow easy removal and replacement of caster wedges.

Bee Line has long been a proponent of the benefits of camber correction. We know that our patented camber correction equipment, along with our many years of experience and extreme accuracy allow users of Bee Line equipment to perform camber correction safely and accurately. Camber correction, as part of a "Total Vehicle Wheel Alignment", allows vehicle owners to achieve maximum tire life and fuel efficiency.